Display Case Oak Framed – Price per inch


Custom Made Display Cases

To calculate the Price, simply add the total inches of your case ie. Length + Height + Depth, enter the total in the Qty field and choose your Colour or style.

For example, if your case is 12″ high, 10″ deep and 10″ wide, the total inches is 32″, so you enter 32 into the Qty box below. Choose your Colour and click Add to basket. We will contact you to confirm the size of the case.

NB: Glass cases cannot be shipped. Collection only.

SKU: Oak-Frame Category:


Oak Framed Display Cases are primarily for taxidermy mounts, but many have been sold for product display, antiques etc.

The frame is oak and the beading is very fine - 10mm right angle.  The lids are loose and lift off ie. the glass top comes away from the base for easy access.

By default, the bottom of the base will be shaped. The height of the base frame is 3" and it protrudes approximately 1 inch from the glass.

The case comes empty with bare chipboard or MDF for the base.  You can fit any base you wish or we can do this for you at an extra cost.


Minimum single side size of 6" and total measurement of 22" - any smaller and they are not practical to make.

Maximum single side size of 36", as the cases get too large for the 2mm glass used.

Price is calculated in inches by adding the three measurements together e.g.:
10" High + 10" Long + 10" Deep = 30" X inch price £5.25 to £5.35 depending on style.

To place an order, work out your size and add the number of inches to the Qty field.  We will contact you to confirm the size of the case.

Timescale to produce is about one month to 6 weeks.  Each case is custom made as required.

Collection yourself only or arrange for your own 'man and van' style courier.

Additional information


Natural Colour, Standard Stained, Black